RM3090E _51 Engine / Hybrid System _008396 2AR-FE ENGINE MECHANICAL _0046872 DRIVE BELT A

2AR-FE ENGINE MECHANICAL  DRIVE BELT  INSTALLATION  


PROCEDURE

Hide 16361A 1.INSTALL FAN AND GENERATOR V BELT

a.
A194911
0.854,0.588 1.038,0.751 0.184,0.163 10 *1 2.661,0.687 2.845,0.85 0.184,0.163 10 *2 2.404,1.57 2.588,1.734 0.184,0.163 10 *3 2.436,2.524 2.62,2.687 0.184,0.163 10 *4 0.845,2.201 1.029,2.364 0.184,0.163 10 *5 1.086,0.674 1.236,0.674 1.236,0.674 1.591,1.126 false
*1
*2
*3
*4
*5
*1 Belt Tensioner
*2 Generator
*3 Engine Water Pump
*4 Cooler Compressor
*5 Crankshaft


Set the fan and generator V belt onto each part as shown in the illustration, except the water pump pulley.


b.

Loosen the fan and generator V belt by turning the belt tensioner clockwise.


c.

Set the fan and generator V belt onto the water pump pulley.

NOTICE:

Make sure that the belt is attached to each pulley. In particular, make sure that the belt is securely fitted into the grooves of the crankshaft pulley.



Hide 51443 2.INSTALL REAR ENGINE UNDER COVER RH

a.

Install the rear engine under cover RH with the 4 clips.


Hide 16470 3.CONNECT RADIATOR RESERVOIR ASSEMBLY

a.

Connect the radiator reservoir assembly with the 2 bolts.

Torque:
5.0 N*m (51 kgf*cm, 44 in.*lbf)